DESCRIPTION
1 ml syringe consists of three parts. These three parts are the needle, the piston and the cylindrical body. Depending on the need, it can be used with or without a needle and it is suitable for both uses. The 1 ml injector, which is a medical raw material, has passed EO sterilization processes and you can use it safely. 1 ml syringe consists of hypodermic needles, polypropylene cylinder, latex-free gasket and polyethylene piston parts.
The product is covered with blister packaging consisting of medical paper and transparent stretch. All injectors offer a 100% guarantee of tightness.
All of the needle tips are produced by laser cutting and most importantly, they made of stainless steel.
How many units is a 1 ml insulin injector?
Each line on the 1 milliliter ml syringe corresponds to 2 units. Thus, a 1 ml or 1 cc or 1 injector provides the opportunity to make up to 100 units of insulin. Each line on the 0.5 milliliter ml syringe corresponds to 1 unit. Thus, it is possible to produce up to 50 units of insulin with 0.5 ml, 0.5 cc or 0.5 insulin injectors.Automatic insulin injectors are actually insulin pens with the well-known name.
There are three means of administering insulin. The first of these is insulin injectors, and there are usually 0.5 or 1 cc syringes for insulin. The second is insulin pens. Finally, there is the insulin pump.
The advantages of insulin pens can be listed as follows.It is very easy to use, first of all, the dose is adjusted and the dose delivery button is pressed. Thus, the error rate in the case of incorrect dose withdrawal is reduced to the lowest levels, even if it does not decrease to zero.It is easy to carry and more practical. It is also very easy to use for sick individuals with visual difficulties, and it is easier to train and the training period is very short compared to normal injectors. Most importantly, automatic insulin injectors are very easy to inject as they have an automatic injection feature.
1 cc Insulin Injector
1 cc Insulin Injector or 1 ml insulin injector is the most preferred cc or ml insulin injector. The product type is called Tuberculin/Insulin Injector (PPD). Syringes are also available. These syringes and needles are disposable. There are two types of insulin injectors in terms of known and most preferred ml of insulin injector. The first of these are 0.5 ml injectors or 0.5 cc injectors, shortly, 0.5 injectors. The other is 1 ml injector or 1 cc injector, shortly, 1 injectors.There are four answers for what are the types of injections at home. The first of these four types of home injections is the “Subcutaneous (Subcutaneous / SC) Injection” type. The second one is known as “Intramuscular/IM Muscle Injection”. Third one is the “Intravenous (Intravenous / IV) Injection”, and the fourth one is the “Subcutaneous (Intradermal / IV) Injection”.
How many cc is 1 injector?
It is a measure conversion that is very curious and confused when taking the injector. This can be explained by the equation 1 cubic centimeter (cm³,
- cc) = 1 milliliter (mL). Shortly, a 1 injector equals 1 cc and at the same time 1 mL. All units of measurement are 1. Shortly, 1 ml syringe is equal to 1 cc syringe.
1ml syringe box
The price of 1 ml injector depends on its quality, the materials from which it is produced, etc. even if it differs according to normal standards, it is labeled as 150 pieces in inner boxes and then 20 inner boxes in an outer box, with a total of 3000 pieces in the outer box, and becomes ready for sterilization.
What is a syringe?A syringe is generally a small pump for sucking or pushing air or liquids. In medicine, filling a tissue or cavity with pressurized fluid is called injection. The tools that enable the injection process are called injectors. In other words, it is a tool that performs the injection event. The injector has a cylindrical body, a movable piston, a tap made of nickel, steel or platinum, and a needle is attached to its tip.
1 ml syringe is a very reliable sterile product.
Click on the contact for information about prices.
1ml injector Specifications
• 3 Pieces
• With or Without Needle
• Hypodermic Needles
• Medical Raw Material
• Polypropylene Cylinder
• Polyethylene Piston
• Latex-free gasket
• Blister Packaging consisting of medical paper and transparent film
• EO Sterilization
